SGI IS2224 Bedienungsanleitung PDF herunterladen (Seite 43)

620J Storage Enclosure Installation and Overview Guide A-1

Appendix A

Adding a Second Environmental Services

Monitor (ESM) Canister

In this procedure, you will add a second environmental services monitor (ESM) canister

in the storage enclosure.

Before you start to add the ESM canister in the storage enclosure, gather antistatic

protection and the ESM canister.

ATTENTION Possible equipment damage – You must replace an ESM or blank

canister within 3 minutes after removal from an operating storage

enclosure to prevent the possibility of overheating the equipment

ATTENTION Possible extended outage – You must add the new ESM with the

power turned on to ensure auto code synchronization of the native

controller firmware to the new ESM canister, and to prevent the

possibility of extended outage.

ATTENTION Possible hardware damage – To prevent electrostatic discharge

damage to the storage enclosure, use proper antistatic protection

when handling storage enclosure components.

1 If possible, use the storage management software to create, save, and print a new

storage array profile.

2 Put on antistatic protection.

1 2 ... 38 39 40 41 42 43 44 45 46

Keine Kommentare

SGI IS2224 Bedienungsanleitung Seite 43