SGI IS2224 Bedienungsanleitung PDF herunterladen (Seite 31)

620J Storage Enclosure Installation and Overview Guide 4-1

Chapter 4

Turning on the Power and Checking for

Problems

Steps to Turn On – Power

IMPORTANT You must turn on the power to all connected storage enclosures before

you turn on the power for the host. Performing this action ensures that

the host recognizes each attached storage enclosure.

Access the Power switches from the rear of the storage array.

1 Turn off the Power switches on each power-fan canister in all of the newly installed

storage enclosures.

2 Make sure that all of the power cords are connected.

3 If the main circuit breaker switches in the cabinet are not already turned on, turn on

the circuit breaker switches now.

4 Turn on the Power switch on each power-fan canister in all of the newly installed

storage enclosures.

Figure 4–1 Location of the Power Switches on the Storage Enclosure

1 Power Switches

Navigational Aid

“Steps to Turn On – Power”Page 4-1

“Steps to Check for Problems – Storage Enclosure”Page 4-2

97002-10

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 45 46

Keine Kommentare

SGI IS2224 Bedienungsanleitung Seite 31