SGI IS2224 Bedienungsanleitung PDF herunterladen (Seite 19)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Steps to Install – Drives and Drive Canisters

620J Storage Enclosure Installation and Overview Guide 2-9

Steps to Install – Drives and Drive Canisters

Storage enclosures are delivered without the drives installed in the drive canisters.

Follow the steps in this procedure to install the drives in the canisters and then to install

the canisters in the storage enclosure. If you have already installed the drive canisters in

the storage enclosure, you can skip this step and go to “Things to Know – Connecting

Power Cords” on page 2-10.

ATTENTION Risk of equipment malfunction – To avoid exceeding the functional

and environmental limits, install only drives that have been approved

by your supplier. System integrators, resellers, system administrators, or

users can install the drives.

1 Position the drive in the drive canister, being sure to align the drive properly toward

the back (opened end) of the canister. Secure the drive with two screws on each

side of the canister (Figure 2–8).

2 Be sure the four screws are tightened and will hold the drive securely in the drive

canister. The HDD mounting screws should be tightened to 4 in-lb to securely hold

the drive in the drive canister.

Figure 2–8 Installing a Drive in a Drive Canister

1 Drive

2 Drive Canister

96009-01

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 45 46

Keine Kommentare

SGI IS2224 Bedienungsanleitung Seite 19