SGI Rackable C2112-4G3 Betriebsanweisung PDF herunterladen (Seite 39)

Install the System into a Rack

007-5759-001 15

Install the Server in a Rack

Warning: The SGI Rackable C2112-4G3 server weighs up to 85 lbs (38.6 kg) Always use

proper lifting techniques when you move the server. Always get the assistance of another

qualified person when you install the sever in a rack. Failure to do so may result in serious

personal injury or damage to the equipment.

You should now have rails attached to both the server chassis and the rack unit. The next step is

to install the server into the rack.

1. Extend the outer rails as shown in Figure 2-2.

2. Align the inner rails of the chassis with the outer rails on the rack.

3. Slide the inner rails into the outer rails, keeping the pressure even on both sides. When the

chassis has been pushed completely into the rack, it should click into the locked position.

4. Optional screws are recommended to secure and hold the front of the chassis to the rack.

Figure 2-2 Installing the Server in a Rack

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 103 104

Keine Kommentare

SGI Rackable C2112-4G3 Betriebsanweisung Seite 39