SGI Ethernet Card Betriebsanweisung PDF herunterladen (Seite 31)

SGI

10-Gigabit Ethernet Network Adapter User’s Guide

The output will display information about the network adapters currently

installed in the system, as follows:

Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll

xg1 1500 10.50.1 system.name 0 0 1 0 0

2. To bring down the adapter, enter the following command, where N is the number

of the adapter:

ifconfig xgN down

3. To change the MTU size of the 10-Gbit Ethernet adapter, enter the following

command, where Nis the number of the adapter:

ifconfig xgN mtu 9600

4. To restart the adapter, enter the following:

ifconfig xgN up

5. Enter the following command to verify that the MTU size has been changed:

netstat -i

The output should look similar to the following:

Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll

xg1 9600 10.50.1 system.name 0 0 3 0 0

007–4669–003 15

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 40 41

Keine Kommentare

SGI Ethernet Card Betriebsanweisung Seite 31